|
This voltmeter is a round gauge, that is inserted into the gauge panel via a 2 1/16 diameter hole. It is clamped into place from behind the panel face with the supplied plastic back clamp, nuts and washers. The gauge face is black with white markings and a white pointer. The pointer travels from left to right over approximately 60 degrees of arc with a range of 10 volts DC on the left and 16 volts dc on the right. This gauge is designed to be used on engines with a 12 volt dc battery system. The trim ring around the face of the gauge (the bezel) is black. The gauge can be illuminated via a bulb inserted from into the rear of the plastic case. This feature is supplied as part of our standard offering but does not have to be used by the customer.
|
